| #1 Heavy Scratch Remover Requires use of #2 for final finishing. Shake well. Test in an inconspicuous area. Apply #1 liberally. Using a clean, soft cloth, polish with a firm back-and-forth motion at right angles to the scratches. Keep the cloth
saturated with polish at all times. Continue polishing until only fine scratches remain. Using a clean cloth, it is important to remove all remaining polish! Using a clean cloth, apply #2 in a circular motion uniformly to entire surface. Polish using light pressure until #2 dries to a light haze. Using a clean portion of the cloth, buff the surface clean. Follow with #1 for best results. | #2 Fine Scratch Remover Shake well. Test in an inconspicuous
area. Apply #2 liberally. Using a clean,
soft cloth, polish with a firm back-and-forth motion at right angles to the scratches. Keep the cloth saturated with polish at all times. When the worst scratches have been polished out, reapply #2 uniformly in a circular motion to the entire surface using short, circular strokes and light pressure. Allow to dry to a light haze. Using a clean portion of the cloth, buff the surface to a slippery glaze using firm, short strokes. This procedure is imperative in achieving the best results. For heavy scratches, multiple applications of #2 or
application of #1 may be required. Follow with #3 for best results. | #3 Plastic Clean & Shine If the surface is extremely dirty, apply #3 liberally and wipe using long, sweeping strokes. Do not use pressure at this time or large dirt particles may scratch the plastic.
Re-apply #3. Polish using short, circular strokes with a clean portion of the cloth. When surface is thoroughly clean and
uniformly covered, buff to a slippery glaze with a clean portion of the cloth. Surfaces buffed to a high glaze are more resistant to dust and future scratching. Reapply #3 regularly to maintain the anti static, smudge and scratch resistant properties. |
